Select Currency:

https://www.kaniwaba.com/product-page/eride-pro-pedal-kit-v4-0 E RIDE PRO Basic Pedal Kit V4.0 Improved pedal kit for your E RIDE PRO YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT PRODUCT INFORMATION Carefully designed Pedal Kit for the ERIDE PRO. What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will propel your ebike IF you add the ERIDE PRO Power Kit Add-on for Pedal Kits V3.0 and/or the ERIDE PRO Electronic Pedal Assist Kit Add-on for Pedal Kits. A pedal kit that lets your rear suspension WORK. The pedal kit is located directly on the frame allowing the swing arm to move freely. Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! NEW! Allows chain tension adjustment if power kit added Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminum made in order to reduce weight. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

https://www.kaniwaba.com/product-page/eride-pro-electromechanical-pedal-kit-v4-0 E RIDE PRO Electromechanical Pedal Kit V4.0 Improved pedal kit for your E ride Pro. COMPATIBLE WITH ALL ERIDE PRO MODELS! YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT PRODUCT INFORMATION Carefully designed Pedal Kit for the ERIDE PRO. What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! The SUR-RON / SEGWAY Pedal Kit V3.0 plus the SUR-RON / SEGWAY Power Kit Add-on for Pedal Kits V3.0, plus the SUR-RON / SEGWAY Electronic Pedal Assist Kit Add-on upgrade. This pedal kit WILL propel your ebike both mechanically and electronically. You get a carefully designed split sprocket to install on the jackshaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 34 link bicycle chain with master link so you can easily install on uninstall, a 3 position sensor, a controller, and a cadence sensor! Cadence sensor to detect pedal speed. Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed. Compatible with chain or belt drives NEW! Allows chain tension adjustment A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Compatible with chain or belt drives Chain guard must be removed Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Reduced wobble. Little to no wobble of the chain and improved in this V3.0, since it is not connected to the main drive chain, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight. With a weight of around 4.3 Lb (2.0 kg). The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. OEM Look. Discrete installation, all cables hidden! Propels the bike using the bike's battery. * With original sprocket, original controller, and flat road.

https://www.kaniwaba.com/product-page/e-ride-pro-mechanical-pedal-kit-v4-0 E RIDE PRO Mechanical Pedal Kit V4.0 Improved pedal kit for your E Ride Pro. YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT PRODUCT INFORMATION Carefully designed Pedal Kit for the SUR-RON. What YOU get: The E Ride Pro Pedal Kit plus the SUR-RON / SEGWAY Power Kit Add-on for Pedal Kits V3.0. Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit WILL propel your ebike. You get a carefully designed split sprocket to install on the jackshaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, and a 34 link bicycle chain with master link so you can easily install on uninstall! Add the E Ride Pro Electronic Pedal Kit Add-on for faster speed when pedaling. A pedal kit that lets your rear suspension WORK. Located directly on the rear swingarm, it springs your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Compatible with chain or belt drives NEW! Allows chain tension adjustment Chain guard must be removed Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight. With a weight of around 4.3 Lb (2.0 kg). The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

KANIWABA https://www.kaniwaba.com/product-page/talaria-xxx-electronic-power-pedal-kit What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! The TALARIA XXX Power Pedal Kit V3.0 plus the Electronic Pedal Assist for Talaria XXX Upgrade. This pedal kit WILL propel your ebike both mechanically and electronically. You get a carefully designed sprocket set to install on jackshaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 28 link bicycle chain with master link so you can easily install on uninstall, a 3 position switch, a controller, and a cadence sensor with fixing bracket! Cadence sensor to detect pedal speed. Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed. Compatible with chain or belt drives A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Compatible with chain or belt drives Chain guard must be removed Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight. With a weight of around 4.3 Lb (2.0 kg). The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. OEM Look. Discrete installation, all cables hidden! Propels the bike using the bike's battery. * With original sprocket, original controller, and flat road. Installation video here Cranks not included in this version unless added. Pedals not included in this version unless added.

Find it at: www.kaniwaba.com Improved pedal kit for your TALARIA XXX. PRODUCT INFORMATION Carefully designed Pedal Kit for the Talaria XXX. What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit WILL propel your ebike. You get a carefully designed sprocket set to install on the jackshaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, and a bicycle chain with master link so you can easily install on uninstall! Add the TALARIA XXX Electronic Pedal Assist Kit Add-on for faster speed when pedaling (Coming Soon). A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Compatible with chain or belt drives Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. Aluminium made in order to reduce weight. With a weight of around 5.0 Lb (2.3 kg). The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

www.kaniwaba.com Carefully designed Pedal Kit for the Talaria Sting R MX4.   What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions!  The TALARIA Sting Power Pedal Kit V3.0 plus the Electronic Pedal Assist for Talaria R MX4 Upgrade. This pedal kit WILL propel your ebike both mechanically and electronically.  You get a carefully designed sprocket set to install on the gearbox's output shaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 36 link bicycle chain with master link so you can easily install on uninstall, a 3 position switch, a controller, and a cadence sensor with fixing bracket!    Cadence sensor to detect pedal speed. Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed. Compatible with chain or belt drives A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Compatible with chain or belt drives Chain guard must be removed Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.   Easy setup.  Adjust the kit to your bike using the stainless steel collars.  You may easily change between pedals or footpegs (and you have two footpeg positions!).  Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free.  New design is maintenance free since it has sealed cartridge bearings. Brace bar.  Also works as a brace bar Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight.  With a weight of around 4.3 Lb (2.0 kg).  The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel.  It will last a long time.  OEM Look.  Discrete installation, all cables hidden!  Propels the bike using the bike's battery. * With original sprocket, original controller, and flat road. Cranks not included in this version unless added. Pedals not included in this version unless added.

www.kaniwaba.com Carefully designed Bicycle Seat Structure for the TALARIA Sting. What YOU get: An aluminium made structure that allows you to install a bicycle seat on your TALARIA to make your bike become a bicycle. Allows you to get the desired seat height! Even during riding when you select a command post! On seat command: You can adjust seat height by pressing the lever below the seat. Yellow lever has no brand, black lever is Zoom brand or similar. Handlebar command: You can adjust seat height from the handlebar. Brand is high end KS EXAform dropper seat post or similar. Min seat height from floor (with 19 in wheels): 34.2 in (87 cm) Max seat height (depends on Seat Post) from floor (with 19 in wheels): 37.80 in (97 cm) Uses 31.6 mm seatpost Allows you to pedal more comfortably Compatible with ALL Kaniwaba Pedal Kit Versions Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

www.kaniwaba.com PRODUCT INFORMATION Carefully designed Pedal Kit for the Talaria STING. What YOU get: The Pedal Kit V3.0 for TALARIA Sting plus the Power Kit Add-on for TALARIA Sting Pedal Kits V3.0. Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit WILL propel your ebike. You get carefully designed sprockets to install on the gearbox's output shaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, and a 36 link bicycle chain with master link so you can easily install on uninstall! Add the TALARIA Electronic Pedal Kit for faster speed when pedaling (available soon). A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Compatible with chain or belt drives Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have three footpeg positions!), crank puller needed. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Reduced wobble. Little to no wobble of the chain and improved in this V3.0, since it is not connected to the main drive chain, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight. With a weight of around 5.0 Lb (2.3 kg). The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

www.kaniwaba.com https://www.kaniwaba.com/pedal-kits Now our Pedal Kits V4.0 and allow for chain tension adjustment!

www.kaniwaba.com https://www.kaniwaba.com/talaria-sting-pedal-kits YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT PRODUCT INFORMATION Carefully designed Pedal Kit for the Talaria Sting. What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! The TALARIA Sting Power Pedal Kit V3.0 plus the Electronic Pedal Assist Upgrade. This pedal kit WILL propel your ebike both mechanically and electronically. You get a carefully designed sprocket set to install on the gearbox's output shaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 36 link bicycle chain with master link so you can easily install on uninstall, a 3 position switch, a controller, and a cadence sensor with fixing bracket! Cadence sensor to detect pedal speed. Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed. Compatible with chain or belt drives A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Compatible with chain or belt drives Chain guard must be removed Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!), crank puller needed. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Reduced wobble. Little to no wobble of the chain and improved in this V3.0, since it is not connected to the main drive chain, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight. With a weight of around 4.3 Lb (2.0 kg). The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. OEM Look. Discrete installation, all cables hidden! Propels the bike using the bike's battery. * With original sprocket, original controller, and flat road.

https://www.kaniwaba.com/product-page/talaria-sting-electronic-pedal-assist-kit-add-on-for-pedal-kits Allows to set bike speed to 20 mph or 25 km/h when switch is in position I or II. in position 0 bike has original speed. What YOU get: In the BOX: electronic controller, 3 position handlebar switch, cadence sensor and sensor fixing bracket. This kit, when added to the KANIWABA TALARIA Sting Pedal Kit or TALARIA Sting Power Pedal Kit, WILL propel your ebike electronically. You get a carefully designed plug and play system which connects to the cable coming from the throttle and to the one receiving the throttle signal. Cadence sensor to detect pedal speed. Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed. Compatible with ALL KANIWABA TALARIA Sting Pedal Kit and Power Pedal Kit Versions Compatible with chain or belt drives Durable Materials. Water resistant switch, cadence sensor, connectors and control box. Speed Control. It will propel your ebike to the table speeds mentioned . OEM Look. Discrete installation, all cables hidden! Propels the bike using the bike's battery.

Our Electronic Pedal Assist has 3 different riding modes, here we are in a Street ride in Medellin, Colombia!

www.kaniwaba.com https://www.kaniwaba.com/product-page/talaria-sting-electronic-pedal-assist-kit-add-on-for-pedal-kits PRODUCT INFORMATION Carefully designed Electronic Pedal Assist Kit for the TALARIA Sting. What YOU get: In the BOX: electronic controller, 3 position handlebar switch, cadence sensor and sensor fixing bracket. This kit, when added to the KANIWABA TALARIA Sting Pedal Kit or TALARIA Sting Power Pedal Kit, WILL propel your ebike electronically. You get a carefully designed plug and play system which connects to the cable coming from the throttle and to the one receiving the throttle signal. Cadence sensor to detect pedal speed. Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed. Compatible with ALL KANIWABA TALARIA Sting Pedal Kit and Power Pedal Kit Versions Compatible with chain or belt drives Durable Materials. Water resistant switch, cadence sensor, connectors and control box. Speed Control. It will propel your ebike to the table speeds mentioned . OEM Look. Discrete installation, all cables hidden! Propels the bike using the bike's battery.

www.kaniwaba.com https://www.kaniwaba.com/talaria-sting-pedal-kits PRODUCT INFORMATION Carefully designed Pedal Kit for the TALARIA Sting. What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will NOT propel your ebike. It will only propel it IF the TALARIA Electronic Pedal Assist Kit Add-on is added in the future. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

www.kaniwba.com YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT PRODUCT INFORMATION Carefully designed Pedal Kit for the Talaria Sting. https://www.kaniwaba.com/talaria-sting-pedal-kits What YOU get: The TALARIA Pedal Kit V3.0 and Electronic Pedal Assist Kit. Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will propel your ebike. A carefully designed plug and play system which connects to the cable coming from the throttle and to the one receiving the throttle signal. Cadence sensor to detect pedal speed. Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed. Compatible with chain or belt drives A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel, water resistant switch, cadence sensor, connectors and control box. It will last a long time. OEM Look. Discrete installation, all cables hidden! Propels the bike using the bike's battery. * With original sprocket, original controller, and flat road.

Visit www.kaniwaba.com for more!

Visit www.kaniwaba.com for more!

Visit www.kaniwaba.com for more!

www.kaniwaba.com PRODUCT INFORMATION Carefully designed Bicycle Seat Structure for the SurRon.   What YOU get: An aluminium made structure that allows you to install a bicycle seat on your Surron or Segway to make your bike become a bicycle. Allows you to get the desired seat height!  Even during riding when you select a command post! On seat command: You can adjust seat height by pressing the lever below the seat.  Yellow lever has no brand, black lever is Zoom brand or similar. Handlebar command:  You can adjust seat height from the handlebar.  Brand is high end KS EXAform dropper seat post or similar. Min seat height from floor (with 19 in wheels): 35.5 in (90 cm) Max seat height from floor (with 19 in wheels): 39.40 in (100 cm) Uses 31.6 mm seatpost Allows you to pedal more comfortably Compatible with ALL Kaniwaba Pedal Kit Versions Durable Materials. Parts made of aluminum and stainless steel.  It will last a long time. 

www.kaniwaba.com PRODUCT INFORMATION Carefully designed Bicycle Seat Structure for the SurRon.   What YOU get: An aluminium made structure that allows you to install a bicycle seat on your Surron or Segway to make your bike become a bicycle. Allows you to get the desired seat height!  Even during riding when you select a command post! On seat command: You can adjust seat height by pressing the lever below the seat.  Yellow lever has no brand, black lever is Zoom brand or similar. Handlebar command:  You can adjust seat height from the handlebar.  Brand is high end KS EXAform dropper seat post or similar. Min seat height from floor (with 19 in wheels): 35.5 in (90 cm) Max seat height from floor (with 19 in wheels): 39.40 in (100 cm) Uses 31.6 mm seatpost Allows you to pedal more comfortably Compatible with ALL Kaniwaba Pedal Kit Versions Durable Materials. Parts made of aluminum and stainless steel.  It will last a long time.

www.kaniwaba.com https://www.kaniwaba.com/product-page/electronic-pedal-kit-v3-0-for-sur-ron-segway-x